Research Status and Prospect of Laser Scribing Process and Equipment for Chemical Milling Parts in Aviation and Aerospace

doi:10.3390/mi13020323

OPT OpenIR > 瞬态光学研究室

	Research Status and Prospect of Laser Scribing Process and Equipment for Chemical Milling Parts in Aviation and Aerospace
	Wang, Jian 1,2; Liu, Qiang 1,3; Sun, Pengpeng 1,2; Zang, Chenxin 1,2; Wang, Liuquan 1,2; Ning, Zhiwei 1,2; Li, Ming 4; Wang, Hui 5
作者部门	瞬态光学研究室
	2022-02
发表期刊	Micromachines
ISSN	2072666X
卷号	13 期号:2
产权排序	4
摘要	Laser scribing in chemical milling is an important process which can effectively improve the precision and efficiency of chemical milling, and is of great significance to improve the thrust– weight ratio and manufacturing efficiency of aviation and aerospace parts. According to the scribing requirements in chemical milling for aviation and aerospace parts, the process and mechanism of laser scribing were studied and the influence of different process parameters for the quality of laser scribing was analyzed. Based on the review of related research literature, the laser scribing process, the ablation mechanism and technology of different materials and the selective laser removal process for "laser–coating–substrate" are summarized and discussed. Based on the requirements of high-precision laser scribing on complex surfaces, the current situation of laser scribing equipment is summarized. Finally, the practical challenges and key technical problems for the laser scribing process are summarized, and the application and development of laser scribing in aerospace manufacturing are prospected. © 2022 by the authors. Licensee MDPI, Basel, Switzerland.
关键词	laser scribing chemical milling ablation mechanism and technology second scribing selective laser removal process
DOI	10.3390/mi13020323
收录类别	SCI ; EI
语种	英语
WOS记录号	WOS:000807741100001
出版者	MDPI
EI入藏号	20220911728059
引用统计	被引频次：1[WOS] [WOS记录] [WOS相关记录]
文献类型	期刊论文
条目标识符	http://ir.opt.ac.cn/handle/181661/95746
专题	瞬态光学研究室
通讯作者	Wang, Jian; Liu, Qiang
作者单位	1.School of Mechanical Engineering and Automation, Beihang University, Beijing; 100083, China; 2.Research and Application Center of Advanced CNC Machining Technology and Innovation, Beijing; 100191, China; 3.Jiangxi Research Institute, Beihang University, Nanchang; 330096, China; 4.Xi’an Institute of Optics and Precision Mechanics of CAS, Xi’an; 710119, China; 5.AECC Shenyang Liming Aero-Engine Co., Ltd, Shenyang; 110043, China
推荐引用方式 GB/T 7714	Wang, Jian,Liu, Qiang,Sun, Pengpeng,et al. Research Status and Prospect of Laser Scribing Process and Equipment for Chemical Milling Parts in Aviation and Aerospace[J]. Micromachines,2022,13(2).
APA	Wang, Jian.,Liu, Qiang.,Sun, Pengpeng.,Zang, Chenxin.,Wang, Liuquan.,...&Wang, Hui.(2022).Research Status and Prospect of Laser Scribing Process and Equipment for Chemical Milling Parts in Aviation and Aerospace.Micromachines,13(2).
MLA	Wang, Jian,et al."Research Status and Prospect of Laser Scribing Process and Equipment for Chemical Milling Parts in Aviation and Aerospace".Micromachines 13.2(2022).

条目包含的文件
文件名称/大小	文献类型	版本类型	开放类型	使用许可
Research Status and （13052KB）	期刊论文	出版稿	限制开放	CC BY-NC-SA	请求全文