瞬态光学研究室知识库

A Yb/Ce codoped aluminosilicate fiber was successfully fabricated by the chelate gas phase deposition technique. Using the homemade fiber as the amplifier stage in a master oscillator power amplifier configuration laser setup, a near single mode laser output (M-2 = 1.55) with an output power of 1026 W and slope efficiency of 84.8% is obtained. In the 100 hour photodarkening experiment, the entire reduced power is less than 14 W, and the ratio, compared to the initial 1026 W output power, is less than 1.4%. The investigation of optical properties indicates that Yb/Ce codoped aluminosilicate fiber fabricated by the chelate gas phase deposition technique shows homogenous distribution, appropriate absorption coefficient, low background attenuation, high optical-to-optical efficiency and a rather low photodarkening loss, making it a promising candidate as an active fiber for a reliable and efficient fiber laser in high-power applications. (C) 2016 Optical Society of America