Design of transient light signal simulator based on FPGA | |
Kang, Jing![]() | |
2014 | |
会议名称 | International Symposium on Optoelectronic Technology and Application 2014: Optical Remote Sensing Technology and Applications, IPTA 2014 |
会议日期 | 2014-05-13 |
会议地点 | Beijing, China |
出版者 | SPIE |
会议主办者 | China High-Tech Industrialization Association; Chinese Society of Astronautics (CSA) |
产权排序 | 1 |
摘要 | A design scheme of transient light signal simulator based on Field Programmable gate Array (FPGA) was proposed in this paper. Based on the characteristics of transient light signals and measured feature points of optical intensity signals, a fitted curve was created in MATLAB. And then the wave data was stored in a programmed memory chip AT29C1024 by using SUPERPRO programmer. The control logic was realized inside one EP3C16 FPGA chip. Data readout, data stream cache and a constant current buck regulator for powering high-brightness LEDs were all controlled by FPGA. A 12-Bit multiplying CMOS digital-to-analog converter (DAC) DAC7545 and an amplifier OPA277 were used to convert digital signals to voltage signals. A voltage-controlled current source constituted by a NPN transistor and an operational amplifier controlled LED array diming to achieve simulation of transient light signal. LM3405A, 1A Constant Current Buck Regulator for Powering LEDs, was used to simulate strong background signal in space. Experimental results showed that the scheme as a transient light signal simulator can satisfy the requests of the design stably. |
作者部门 | 空间光学技术研究室 |
收录类别 | CPCI(ISTP) ; EI |
语种 | 英语 |
ISSN号 | 0277786X |
文献类型 | 会议论文 |
条目标识符 | http://ir.opt.ac.cn/handle/181661/22598 |
专题 | 空间光学技术研究室 |
推荐引用方式 GB/T 7714 | Kang, Jing,Chen, Rong-Li,Wang, Hong. Design of transient light signal simulator based on FPGA[C]:SPIE,2014. |
条目包含的文件 | ||||||
文件名称/大小 | 文献类型 | 版本类型 | 开放类型 | 使用许可 | ||
Design of transient (570KB) | 限制开放 | CC BY | 请求全文 |
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。
修改评论