| DESIGN OF LOW-TIMING-JITTER, STABLE PICOSECOND OPTICAL-PULSE SOURCE USING AN UNCOOLED GAIN-SWITCHED FABRY-PEROT SEMICONDUCTOR LASER WITH EXTERNAL CONTINUOUS-WAVE LIGHT INJECTION | |
| Liu, Yuanshan2; Zhang, Jian-Guo1 | |
| 作者部门 | 瞬态光学国家重点实验室 |
| 2011-09-01 | |
| 发表期刊 | MICROWAVE AND OPTICAL TECHNOLOGY LETTERS
 |
| ISSN | 0895-2477 |
| 卷号 | 53期号:9页码:2100-2105 |
| 摘要 | This paper presents the design of a low-timing-jitter, stable picosecond optical-pulse source, which is based on a low-cost, uncooled Fabry-Perot (FP) semiconductor laser in the gain-switching operation. The wavelength of the designed laser can be tuned from 1538 to 1554 nm under the condition of external continuous-wave (CW) light injection. The relationship between injection light power and timing jitter or between injection light power and pulse width of this gain-switched laser is studied experimentally. Our results show that the optical pulses with widths about 28 and 19 ps at the repetition frequencies of 2.5 and 5 GHz, respectively, are produced by an uncooled gain-switched FP semiconductor laser with timing jitter <= 600 fs, when the injection power and wavelength of an external CW light are appropriately chosen. The use of a 500-m dispersion-compensation fiber can easily compress the optical pulses from 26 to 7.7 ps. Moreover, the stability of an uncooled gain-switched FP laser is experimentally investigated, and a stable optical-pulse train at 5 GHz can be feasibly produced over 7 h of continuously working. (C) 2011 Wiley Periodicals, Inc. Microwave Opt Technol Lett 53:2100-2105, 2011; View this article online at wileyonlinelibrary.com. DOI 10.1002/mop.26176 |
| 文章类型 | Article |
| 关键词 | Gain-switched Laser Low-timing-jitter Optical-pulse Source Picosecond Pulse Generation Uncooled Fabry-perot Laser External Light Injection Operation Stability |
| WOS标题词 | Science & Technology ; Technology ; Physical Sciences |
| DOI | 10.1002/mop.26176 |
| URL | 查看原文 |
| 收录类别 | SCI ; EI |
| 关键词[WOS] | DFB LASER ; SIGNAL GENERATION ; DIODE ; TRANSMISSION ; AMPLIFIER ; SYSTEMS |
| 语种 | 英语 |
| WOS研究方向 | Engineering ; Optics |
| WOS类目 | Engineering, Electrical & Electronic ; Optics |
| WOS记录号 | WOS:000292600900041 |
| 引用统计 | |
| 文献类型 | 期刊论文 |
| 条目标识符 | http://ir.opt.ac.cn/handle/181661/19696 |
| 专题 | 瞬态光学研究室 |
| 作者单位 | 1.London S Bank Univ, Dept Engn & Design, London SE1 0AA, England 2.Chinese Acad Sci, State Key Lab Transient Opt & Photon, Xian Inst Opt & Precis Mech, Xian 710068, Peoples R China |
| 推荐引用方式 GB/T 7714 | Liu, Yuanshan,Zhang, Jian-Guo. DESIGN OF LOW-TIMING-JITTER, STABLE PICOSECOND OPTICAL-PULSE SOURCE USING AN UNCOOLED GAIN-SWITCHED FABRY-PEROT SEMICONDUCTOR LASER WITH EXTERNAL CONTINUOUS-WAVE LIGHT INJECTION[J]. MICROWAVE AND OPTICAL TECHNOLOGY LETTERS,2011,53(9):2100-2105. |
| APA | Liu, Yuanshan,&Zhang, Jian-Guo.(2011).DESIGN OF LOW-TIMING-JITTER, STABLE PICOSECOND OPTICAL-PULSE SOURCE USING AN UNCOOLED GAIN-SWITCHED FABRY-PEROT SEMICONDUCTOR LASER WITH EXTERNAL CONTINUOUS-WAVE LIGHT INJECTION.MICROWAVE AND OPTICAL TECHNOLOGY LETTERS,53(9),2100-2105. |
| MLA | Liu, Yuanshan,et al."DESIGN OF LOW-TIMING-JITTER, STABLE PICOSECOND OPTICAL-PULSE SOURCE USING AN UNCOOLED GAIN-SWITCHED FABRY-PEROT SEMICONDUCTOR LASER WITH EXTERNAL CONTINUOUS-WAVE LIGHT INJECTION".MICROWAVE AND OPTICAL TECHNOLOGY LETTERS 53.9(2011):2100-2105. |
| 条目包含的文件 | ||||||
| 文件名称/大小 | 文献类型 | 版本类型 | 开放类型 | 使用许可 | ||
| DESIGN OF LOW-TIMING（492KB） | 期刊论文 | 出版稿 | 限制开放 | CC BY-NC-SA | 请求全文 | |
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。
修改评论