Optimal design of a gravitational wave telescope system for the suppression of stray light | |
Liang, Rong1,2; Zhou, Xiaojun1; Xu, Huangrong1; Wu, Dengshan1; Li, Chenxi1; Yu, Weixing1,2![]() | |
作者部门 | 光谱成像技术研究室 |
2024-03-10 | |
发表期刊 | Applied Optics
![]() |
ISSN | 1559128X;21553165 |
卷号 | 63期号:8页码:1995-2003 |
产权排序 | 1 |
摘要 | For gravitational wave detection, the telescope is required to have an ultra-low wavefront error and ultra-high signal-to-noise ratio, where the power of the stray light should be controlled on the order of less than 10-10. In this work, we propose an alternative stray light suppression method for the optical design of an off-axis telescope with four mirrors by carefully considering the optimal optical paths. The method includes three steps. First, in the period of the optical design, the stray light caused by the tertiary mirror and the quaternary mirror is suppressed by increasing the angle formed by the optical axes of the tertiary mirror and the quaternary mirror and reducing the radius of curvature of the quaternary mirror as much as possible to make sure the optical system provides a beam quality with a wavefront error less than λ/80. Next, the stray light could satisfy the requirement of the order of 10-10 when the level of roughness reaches 0.2 nm, and the pollution of mirrors is controlled at the level of CL100. Finally, traditional stray light suppression methods should also be applied to mechanics, including the use of the optical barrier, baffle tube, and black paint. It can be seen that the field stop can efficiently reduce stray light caused by the secondary mirror by more than 55% in the full field of view. The baffle tube mounted on the position of the exit pupil can reduce the overall stray light energy by 5%, and the difference between the ideal absorber (absorption coefficient is 100%) and the actual black paint (absorption coefficient is 90%) is 3.2%. These simulation results are confirmed by theMonte Carlo method for a stray light analysis. Based on the above results, one can conclude that the geometry structure of the optical design, the quality of mirrors, and the light barrier can greatly improve the stray light suppression ability of the optical system, which is vital when developing a gravitational wave telescope with ultra-lowstray light energy. © 2024 Optica Publishing Group. |
DOI | 10.1364/AO.502610 |
收录类别 | SCI ; EI |
语种 | 英语 |
WOS记录号 | WOS:001225880700003 |
EI入藏号 | 20241215786774 |
引用统计 | |
文献类型 | 期刊论文 |
条目标识符 | http://ir.opt.ac.cn/handle/181661/97286 |
专题 | 光谱成像技术研究室 |
通讯作者 | Yu, Weixing |
作者单位 | 1.Key Laboratory of Spectral Imaging Technology of Chinese Academy of Sciences, Xi’an Institute of Optics and Precision Mechanics, Chinese Academy of Sciences, No. 17, Xinxi Road, Xian; 710119, China; 2.Center of Mechanics Science and Optoelectronics Engineering, University of Chinese Academy of Sciences, Beijing; 100049, China |
推荐引用方式 GB/T 7714 | Liang, Rong,Zhou, Xiaojun,Xu, Huangrong,et al. Optimal design of a gravitational wave telescope system for the suppression of stray light[J]. Applied Optics,2024,63(8):1995-2003. |
APA | Liang, Rong,Zhou, Xiaojun,Xu, Huangrong,Wu, Dengshan,Li, Chenxi,&Yu, Weixing.(2024).Optimal design of a gravitational wave telescope system for the suppression of stray light.Applied Optics,63(8),1995-2003. |
MLA | Liang, Rong,et al."Optimal design of a gravitational wave telescope system for the suppression of stray light".Applied Optics 63.8(2024):1995-2003. |
条目包含的文件 | ||||||
文件名称/大小 | 文献类型 | 版本类型 | 开放类型 | 使用许可 | ||
Optimal design of a (4503KB) | 期刊论文 | 出版稿 | 限制开放 | CC BY-NC-SA | 请求全文 |
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。
修改评论