瞬态光学研究室知识库

Titanium dioxide (TiO2), a conventional n-type semiconductor, was widely used in photocatalysis, electrocatalysis and photoelectrocatalysis due to its good UV absorption and stable physical and chemical properties. However, its wide band gap and low oxygen reaction (OER) activity limited its application in photoelectrochemical (PEC) water splitting. In this work, we successfully constructed type-II Sb-2(S,Se)(3)@TiO2 core-shell heterojunctions. Antimony sulfide selenide (Sb-2(S,Se)(3)) was a quasi-one-dimensional light-absorbing material with an adjustable band gap (1.1-1.8 eV), which broadened the TiO2 light absorption range and effectively promoted the photogenerated carrier separation, transportation and utilization. Of particular note, novel Sb-2(S,Se)(3) nanospheres (NSPs) (ca. 69 nm) were in situ grown inside the tubes attributed to the unique space-confinement effect of TiO2 nanotubes (NTs). The IPCE value for Sb-2(S,Se)(3)@TiO2 at 734 nm was 10.808% compared to 0.030% for TiO2. The separation efficiency and injection efficiency increased from 2.48% and 31.62% to 4.90% and 36.48%, respectively. The onset potential was moved negatively by 60 mV, and the maximum photocurrent density of 1.53 mA cm(-2) at 1.23 V vs. RHE was 13.9 times higher than that of TiO2 (0.11 mA cm(-2)). This work provided a new idea for the application of TiO2 in the field of PEC water splitting.