Optimized design of optical fiber displacement-vibration sensor based on reflection method

OPT OpenIR > 瞬态光学研究室

	Optimized design of optical fiber displacement-vibration sensor based on reflection method
其他题名	基于反射法的光纤位移-振动传感器优化设计
	Dong Qiaomiao 1; Hui Zhanqiang 1; Ruan Chi2
作者部门	瞬态光学技术国家重点实验室
	2016
发表期刊	Journal of Applied Optics
ISSN	1002-2082
卷号	37 期号:2 页码:281-287
产权排序	2
摘要	An optical fiber displacement-vibration sensor using the incoherent light as a light source and the mirror as a reflective surface was analyzed.The analytic expressions of the optical fiber output power and the measurement distance were derived.The relationship between power ratio and measurement distance was detailedly investigated based on different optical fiber radii,different numerical apertures,different spacings and included angles between transmitting and receiving optical fibers.The results of numerical simulation show that the measurement precision and scope are affected by the optical fiber radius,the optical fiber numerical aperture, the distance and axis angle of both transmitting and receiving optical fibers.By analyzing the variation curves of distance and output power ratio,it is helpful to select the appropriate sensor according to the measurement target in practical engineering applications.Moreover, the measurement error was discussed.The results shows that the measuring range of distance is increased with the increasing of optic fiber included angle,while the error rate is reduced. The error rate is 1%for the included angle of 0.25°.
其他摘要	采用非相干光作为光源,以平面镜为反射面,对光纤位移-振动传感器的性能进行研究。推导出光纤输出功率与测量距离的解析表达式,并详细探讨了不同光纤半径、光纤数值孔径、发射光纤和接收光纤间距、发射光纤和接收光纤轴线夹角下输出功率比与测量距离之间的内禀关系。仿真结果表明:光纤半径越小,光纤间距越大,可以测试的距离范围越小;光纤数值孔径、光纤轴线夹角越小,可以测试的距离范围越小。通过分析不同情况下,输出功率比随测量距离变化的关系,可以在实际工程应用中根据测量需要选择设计合适的传感器。此外,还对测量误差进行了分析,得到光纤轴线夹角越小,测量距离的范围越大,误差率越小,当光纤轴线夹角为0.25°时,误差率约为1%。
关键词	Optical Fiber Sensor Reflection Method Power Ratio Optical Fiber Radius Numerical
收录类别	CSCD
语种	中文
引用统计
文献类型	期刊论文
条目标识符	http://ir.opt.ac.cn/handle/181661/28342
专题	瞬态光学研究室
作者单位	1.School of Electronic Engineering,Xi'an University of Posts & Telecommunications, Xi'an, Shaanxi 710061, China 2.State Key Laboratory of Transient Optics and Photonics Technology,Xi'an Institute of Optics and Precision Mechanics,CAS, Xi'an, Shaanxi 710119, China
推荐引用方式 GB/T 7714	Dong Qiaomiao,Hui Zhanqiang,Ruan Chi. Optimized design of optical fiber displacement-vibration sensor based on reflection method[J]. Journal of Applied Optics,2016,37(2):281-287.
APA	Dong Qiaomiao,Hui Zhanqiang,&Ruan Chi.(2016).Optimized design of optical fiber displacement-vibration sensor based on reflection method.Journal of Applied Optics,37(2),281-287.
MLA	Dong Qiaomiao,et al."Optimized design of optical fiber displacement-vibration sensor based on reflection method".Journal of Applied Optics 37.2(2016):281-287.

条目包含的文件
文件名称/大小	文献类型	版本类型	开放类型	使用许可
基于反射法的光纤位移_振动传感器优化设计（734KB）	期刊论文	作者接受稿	限制开放	CC BY-NC-SA	请求全文