Effect of energy density and feeding speed on micro-hole drilling in C/SiC composites by picosecond laser | |
Liu, Yongsheng1; Wang, Chunhui1; Li, Weinan2; Zhang, Litong1; Yang, Xiaojun2; Cheng, Guanghua2; Zhang, Qing1 | |
作者部门 | 瞬态光学国家重点实验室 |
2014-12-01 | |
发表期刊 | JOURNAL OF MATERIALS PROCESSING TECHNOLOGY |
ISSN | 0924-0136 |
卷号 | 214期号:12页码:3131-3140 |
摘要 | The effect of energy density and feeding speed on micro-holes was investigated, which were machined in C/SiC composites by picosecond laser. Morphologies and elemental compositions of the machined holes in 2 mm and 3 mm thickness specimens were analyzed. The results indicated that both energy density and feeding speed had remarkable effect on the quality of micro-holes, especially on the exit side and cross-section of micro-holes. While the circularity of drilling holes on the entry side was affected by the energy density and feeding speed slightly. Additionally, the machining debris also played an important role in the quality of micro-holes. The micro-holes were consisted with three elements C, Si, and O, and those predominantly attributed to C-C (sp(2)), C-C (sp(3)) and Si-O bonds. Moreover, the laser machining process was discussed, which was responsible for the formation of the debris. (C) 2014 Elsevier B.V. All rights reserved. |
文章类型 | Article |
关键词 | Ceramic-matrix Composites Scanning Electron Microscopy (Sem) X-ray Photoelectron Spectroscopy (Xps) Laser Processing |
WOS标题词 | Science & Technology ; Technology |
DOI | 10.1016/j.jmatprotec.2014.07.016 |
收录类别 | SCI ; EI |
关键词[WOS] | ABLATION ; FEMTOSECOND ; ENGINES ; METALS ; PLASMA ; FILMS ; CMCS ; AIR |
语种 | 英语 |
WOS研究方向 | Engineering ; Materials Science |
WOS类目 | Engineering, Industrial ; Engineering, Manufacturing ; Materials Science, Multidisciplinary |
WOS记录号 | WOS:000342245500032 |
引用统计 | |
文献类型 | 期刊论文 |
条目标识符 | http://ir.opt.ac.cn/handle/181661/22154 |
专题 | 瞬态光学研究室 |
作者单位 | 1.Northwestern Polytech Univ, Sci & Technol Thermostruct Composite Mat Lab, Xian 710072, Shaanxi, Peoples R China 2.Chinese Acad Sci, Xian Inst Opt & Precis Mech, State Key Lab Transient Opt & Photon, Xian 10068, Shaanxi, Peoples R China |
推荐引用方式 GB/T 7714 | Liu, Yongsheng,Wang, Chunhui,Li, Weinan,et al. Effect of energy density and feeding speed on micro-hole drilling in C/SiC composites by picosecond laser[J]. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY,2014,214(12):3131-3140. |
APA | Liu, Yongsheng.,Wang, Chunhui.,Li, Weinan.,Zhang, Litong.,Yang, Xiaojun.,...&Zhang, Qing.(2014).Effect of energy density and feeding speed on micro-hole drilling in C/SiC composites by picosecond laser.JOURNAL OF MATERIALS PROCESSING TECHNOLOGY,214(12),3131-3140. |
MLA | Liu, Yongsheng,et al."Effect of energy density and feeding speed on micro-hole drilling in C/SiC composites by picosecond laser".JOURNAL OF MATERIALS PROCESSING TECHNOLOGY 214.12(2014):3131-3140. |
条目包含的文件 | ||||||
文件名称/大小 | 文献类型 | 版本类型 | 开放类型 | 使用许可 | ||
Effect of energy den(3639KB) | 期刊论文 | 出版稿 | 限制开放 | CC BY | 请求全文 |
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。
修改评论