OPT OpenIR  > 光电测量技术实验室
Optimum structural design for collimation frame of space-based two-dimensional turntable
其他题名空间二维转台照准架的结构优化设计
Zhang, Yongqiang(张永强)1,2; Liu, Zhaohui(刘朝晖)1; Li, Zhiguo(李治国)1; Xie, Youjin(谢友金)1
作者部门光电测量技术实验室
2017-12-25
发表期刊Hongwai yu Jiguang Gongcheng/Infrared and Laser Engineering
ISSN10072276
卷号46
产权排序1
摘要

Space-based two-dimensional turntable is the main load-bearing structure of space photoelectric detection equipment, and the collimation frame is the key support component of turntable, so its stiffness characteristics are vital for the performance of turntable. In order to decrease the mass and improve the stiffness performance, the structure of collimation frame was topologically optimized based on the variable density theory by finite element software -MSC. Patran/Nastran. Modal shape of collimation frame was regarded as the deformation of model under the thrust. The model was optimized with stiffness maximization as the objective function, the ratio of residual volume as the constraints. The results show that the model weight after optimization is lighten 1.32 kg and the first-order natural frequency increases 14.5 Hz compared with the model of experience design. The maximum deformation is relatively reduced by 22.4% and the maximum stress value is relatively reduced by 42.6% under the action of gravity in the Z direction and the statics characteristic of model are increased significantly in the other directions. The dynamic characteristics of the collimation frame are improved significantly with the weight reduction. Modal experiment was done for the optimization model and the results indicate that the finite element analysis is correct. Therefore, it is feasible to use the method of topology optimization to design the structure of collimation frame. © 2017, Editorial Board of Journal of Infrared and Laser Engineering. All right reserved.

DOI10.3788/IRLA201746.S113003
收录类别EI
语种中文
引用统计
文献类型期刊论文
条目标识符http://ir.opt.ac.cn/handle/181661/30073
专题光电测量技术实验室
作者单位1.Xi'an Institute of Optics Precision Mechanics, Chinese Academy of Sciences, Xi'an; 710119, China
2.University of Chinese Academy of Sciences, Beijing; 100049, China
推荐引用方式
GB/T 7714
Zhang, Yongqiang,Liu, Zhaohui,Li, Zhiguo,et al. Optimum structural design for collimation frame of space-based two-dimensional turntable[J]. Hongwai yu Jiguang Gongcheng/Infrared and Laser Engineering,2017,46.
APA Zhang, Yongqiang,Liu, Zhaohui,Li, Zhiguo,&Xie, Youjin.(2017).Optimum structural design for collimation frame of space-based two-dimensional turntable.Hongwai yu Jiguang Gongcheng/Infrared and Laser Engineering,46.
MLA Zhang, Yongqiang,et al."Optimum structural design for collimation frame of space-based two-dimensional turntable".Hongwai yu Jiguang Gongcheng/Infrared and Laser Engineering 46(2017).
条目包含的文件
文件名称/大小 文献类型 版本类型 开放类型 使用许可
Optimum structural d(1129KB)期刊论文出版稿开放获取CC BY-NC-SA浏览 请求全文
个性服务
推荐该条目
保存到收藏夹
查看访问统计
导出为Endnote文件
谷歌学术
谷歌学术中相似的文章
[Zhang, Yongqiang(张永强)]的文章
[Liu, Zhaohui(刘朝晖)]的文章
[Li, Zhiguo(李治国)]的文章
百度学术
百度学术中相似的文章
[Zhang, Yongqiang(张永强)]的文章
[Liu, Zhaohui(刘朝晖)]的文章
[Li, Zhiguo(李治国)]的文章
必应学术
必应学术中相似的文章
[Zhang, Yongqiang(张永强)]的文章
[Liu, Zhaohui(刘朝晖)]的文章
[Li, Zhiguo(李治国)]的文章
相关权益政策
暂无数据
收藏/分享
文件名: Optimum structural design for collimation frame of space-based two-dimensional turntable.pdf
格式: Adobe PDF
所有评论 (0)
暂无评论
 

除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。