Design and implementation of CCD exposure time control based on driver timing | |
其他题名 | 基于驱动时序控制CCD曝光时间的设计与实现 |
Liu, Hui1,2; Liu, Xuebin1; Chen, Xiaolai1; Kong, Liang1; Liu, Yongzheng1 | |
作者部门 | 光谱成像技术实验室 |
2015-12-25 | |
发表期刊 | Hongwai yu Jiguang Gongcheng/Infrared and Laser Engineering |
ISSN | 10072276 |
卷号 | 44页码:199-204 |
产权排序 | 1 |
摘要 | A new method for exposure time control by driver timing was proposed for non-electronic shutter frame transfer area CCD imaging detector. Based on the Sarnoff's back illuminated frame transfer array CCD sensor, the charge will be drained quickly in the excess period, with the driver timing controlled by the software. Selecting exposure time as 2 ms, 4 ms, 6 ms and 9.96 ms, the CCD output signal amplitude was measured under system frame frequency of 100 fps. The gray value of continuous 100 frame image calculated by the Matlab. Results show that the method can control the CCD exposure time effectively, and can be implemented by software. It can be widely used in the frame transfer area CCD imaging device without electronic shutter. © 2015, Editorial Board of Journal of Infrared and Laser Engineering. All right reserved. |
收录类别 | EI |
语种 | 中文 |
文献类型 | 期刊论文 |
条目标识符 | http://ir.opt.ac.cn/handle/181661/27806 |
专题 | 光谱成像技术研究室 |
作者单位 | 1.Xi'an Institute of Optics and Precision Mechanics of Chinese Academy of Sciences, Xi'an, China 2.University of Chinese Academy of Sciences, Beijing, China |
推荐引用方式 GB/T 7714 | Liu, Hui,Liu, Xuebin,Chen, Xiaolai,et al. Design and implementation of CCD exposure time control based on driver timing[J]. Hongwai yu Jiguang Gongcheng/Infrared and Laser Engineering,2015,44:199-204. |
APA | Liu, Hui,Liu, Xuebin,Chen, Xiaolai,Kong, Liang,&Liu, Yongzheng.(2015).Design and implementation of CCD exposure time control based on driver timing.Hongwai yu Jiguang Gongcheng/Infrared and Laser Engineering,44,199-204. |
MLA | Liu, Hui,et al."Design and implementation of CCD exposure time control based on driver timing".Hongwai yu Jiguang Gongcheng/Infrared and Laser Engineering 44(2015):199-204. |
条目包含的文件 | ||||||
文件名称/大小 | 文献类型 | 版本类型 | 开放类型 | 使用许可 | ||
Design and implement(565KB) | 期刊论文 | 作者接受稿 | 限制开放 | CC BY-NC-SA | 请求全文 |
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。
修改评论